Built for extreme heat, designed for durability.
At Dexon Rubber, we supply premium SHR (T-2) 150 °C Heat Resistant Rubber Conveyor Belts, engineered for applications where conveyed material or the belt surface experiences elevated temperatures and harsh conditions. These belts are built to handle continuous service up to ~150 °C, and short-term peaks up to ~180 °C.
What “SHR (T-2) 150 °C” means
- “SHR” stands for Super Heat Resistant (often used for belts handling hot material or belts exposed to significant heat).
- “T-2” is the grade designation indicating suitability for continuous surface temperatures around 150 °C and higher material temperatures for shorter durations.
- “150 °C” refers to designed continuous belt surface temperature when conveying coarse hot materials; material temperature handled short-term may reach ~180 °C.
Key Features & Benefits
- High Temperature Resistance: Designed for environments where belt surface temperature may reach ~150 °C and material temperature up to ~180 °C for short periods.
- Special Cover Compound: Rubber covers formulated (commonly an SBR or heat-resistant compounded rubber) to resist cracking, hardening, and ageing under thermal stress.
- Reinforced Carcass/Fabric: Available in high strength carcass types (e.g., EP/NN) that maintain structural integrity under elevated temperature and heavy load.
- Durability in Harsh Conditions: Suitable for conveying sintered ore, clinker, coke, dry lime, dry clay and other hot bulk materials.
- Low Maintenance & Long Service Life: With the right belt selection, maintenance costs drop and uptime improves.
Typical Specifications (Indicative)
| Parameter | Typical Value / Grade* |
|---|---|
| Grade | SHR (T-2) – Special Heat-Resistant Belt (~150 °C) |
| Continuous Surface Temp (Coarse Materials) | Up to approx. 150 °C |
| Short-Term Material Temp | Up to approx. 180 °C for coarse material handling |
| Carcass Construction | EP (Polyester/Nylon) or NN (Nylon/Nylon) – per custom spec |
| Cover Compound | Heat-resistant SBR or specialty rubber designed for high temperature longevity. |
| Cover Thickness | Dependent on width/plies – top cover and bottom cover as per project needs. |
| *Exact values depend on width, ply count and application conditions – please contact us for a detailed specification sheet. |
Typical Applications
The SHR (T-2) 150 °C belt from Dexon Rubber is especially suited for:
- Foundries or metallurgical plants: Handling hot castings, hot ore, sinter, clinker.
- Cement plants: Conveying hot kiln or cooler materials, clinker.
- Coke plants & dry‐lime operations: Transport of hot lumps.
- Power/ash handling systems: Where hot ash or hot bulk material is present.
- Any industrial environment where material temperature and belt surface temperature are significantly elevated and standard belts would degrade prematurely.
